Upload Text File to Edgerouter From Mac

Any text with a light background (like this i) provides instructions for creating the Details Page. When you lot have filled in correct/useful information (instead of any template that's at that place) remove the instructions, equally well as the <WRAP> that encloses it.

The Ubiquiti EdgeRouter iv is a powerful router based on the Cavium Octeon 3 platform. The quadcore MIPS64 CN7130 can practice gigabit routing. The EdgeRouter four offers three regular gigabit Ethernet ports and i SFP port in a modest class factor and a fanless design. Cavium is a Marvell subsidiary since 2018.

1. This is an empty template that suggests the data that should exist present on a well-constructed Device Page. This means, that y'all have to fill it with life and information.

2. At that place are several "fixme" tags with text on a calorie-free groundwork (like this text) throughout this template. As yous fill in the folio, remove those tags and so that people tin can judge its completeness.

3. When in that location are no more than "fixme" tags left, delete this i too, along with the <WRAP> that encloses it.

Go on the manufactures modular

None at this fourth dimension.

Discover out flash layout, then add the flash layout table here (copy, paste, alter the example).

Delight check out the article Flash layout. Information technology contains examples and explanations that draw how to document the flash layout.

There is currently no way to install OpenWrt through the Ubiquiti spider web interface. The possibilities of this happening are rather slim, given the firmware checks Ubiquiti tends to implement.

Specific values needed for tftp

Enter values for "Fill-IN" beneath

Bootloader tftp server IPv4 address	FILL-IN
Bootloader MAC accost (special)	Make full-IN
Firmware tftp epitome	Latest OpenWrt release ( Note: Name must contain "tftp")
TFTP transfer window	FILL-IN seconds
TFTP window start	approximately Fill-in seconds after power on
TFTP client required IP address	FILL-IN

→ generic.sysupgrade

These are generic instructions. Update with your router'southward specifics.

If you don't have a GUI (LuCI) bachelor, you lot can alternatively upgrade via the command line. In that location are two control line methods for upgrading:

Annotation: It is of import that you lot put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc sysupgrade /tmp/thirty.abc

mtd

If sysupgrade does not support this router, employ mtd.

cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/thirty.abc mtd write /tmp/xxx.abc linux && reboot

→ Basic configuration Later on flashing, proceed with this.
Gear up upwards your Internet connection, configure wireless, configure USB port, etc.

The default network configuration is:

Interface Name	Clarification	Default configuration	Remarks
br-lan	LAN bridge	192.168.1.1/24	The span interface covers lan1 through lan3. Lan3 is the SFP port.
lan0	WAN port	DHCP

Port	Switch port
Cyberspace (WAN)	eth0
LAN 1	eth1
LAN 2	eth2
LAN 3	eth3 (SFP)

The Ubiquiti Edgerouter 4 has the following buttons:

Front:
Insert photo of front of the casing

Dorsum:
Insert photo of back of the casing

Backside characterization:
Insert photo of backside label

Note: This volition void your warranty!

Describe what needs to exist done to open up the device, e.1000. remove rubber feet, adhesive labels, screws, …

Main PCB:
Insert photograph of PCB

→ port.serial general data about the serial port, serial port cablevision, etc.

How to connect to the Serial Port of this specific device:
There is a RJ45 panel port placed in the front panel on the EdgeRouter 4. The console cable needs to be a Cisco standard compatible panel cable in gild to work.

Series connection parameters for Ubiquiti EdgeRouter four	115200 / 8N1

→ port.jtag general information about the JTAG port, JTAG cablevision, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

None so far.

EdgeRouter iv bootlog of bootloader version 3. The router was delivered with bootloader version i. Later firmware update to version ii.0.nine and manual update to bootloader version 3, this bootlog is the result. At line 40 and 58 I have removed the routers MAC address and made a annotation instead.

SPI stage 1 bootloader SPI ID: c2:20:17:c2:20 header institute at offset 0x2000 Prototype 1.two: accost: 0xffffffffc0000000, header length: 192, data length: 359416 Validating information... Starting next bootloader at 0xffffffff81000000 Board blazon: UBNT_E300 U-Boot 2013.07 (UBNT Build Version: e300_001_3f6cf) (Aug 27 2018 - 07:sixteen:24) Octeon unique ID: 030000018321f31e0685 N0.LMC0 Configuration Completed: 1024 MB Warning: Board descriptor tuple not found in eeprom, using defaults Core clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR) Start hw_watchdog_start! Finish hw_watchdog_start! Base DRAM address used by u-boot: 0x4fc00000, size: 0x400000 DRAM: 1 GiB Immigration DRAM...... done SF: Detected MX25L6405D with page size 256 Bytes, erase size four KiB, total 8 MiB Found valid SPI bootloader at first: 0x5c000, size: 1438728 bytes Found valid SPI bootloader at commencement: 0x200000, size: 1438728 bytes Loading bootloader from SPI offset 0x200000, size: 1438728 bytes U-Kick 2013.07 (UBNT Build Version: e300_003_6be37) (Jun 05 2019 - 08:57:57) Octeon unique ID: 030000018321f31e0685 Using DRAM size from environment: 1024 MBytes Core clock: k MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR) Base DRAM address used by u-kicking: 0x4f000000, size: 0x1000000 DRAM: 1 GiB Immigration DRAM...... done SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total viii MiB SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB UBNT_E300 r1:0, r2:15, serial #: /*device MAC address goes here*/ MPR 13-02427-xv Loading bootloader from SPI beginning 0x200000, size: 1438728 bytes U-Boot 2013.07 (UBNT Build Version: e300_003_6be37) (Jun 05 2019 - 08:57:57) Octeon unique ID: 030000018321f31e0685 Using DRAM size from surround: 1024 MBytes Cadre clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR) Base DRAM accost used by u-boot: 0x4f000000, size: 0x1000000 DRAM: i GiB Clearing DRAM...... done SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB SF: Detected MX25L6405D with folio size 256 Bytes, erase size iv KiB, full viii MiB UBNT_E300 r1:0, r2:15, serial #: /*device MAC accost goes here*/ MPR 13-02427-15 Wink boot bus region not enabled, skipping NOR wink config DLM0: QSGMII ports selected DLM1: mini-PCIe slots selected DLM2: mini-PCIe slots selected SPI: SPI NOR enabled MMC: Octeon MMC/SD0: 0 PCIe: Link timeout on port 0, probably the slot is empty PCIe: Port one non in PCIe mode, skipping PCIe: Port 2 not in PCIe mode, skipping PCI console init succeeded, 1 consoles, 1024 bytes each Cyberspace: octeth0, octeth1 [Prime number], octeth2, octeth3 Node 0 Interface 0 has 4 ports (QSGMII) Node 0 Interface 1 has 4 ports (QSGMII) Node 0 Interface 2 has 4 ports (NPI) Node 0 Interface 3 has 4 ports (LOOP) Node 0 Interface 4 has 1 ports (AGL) Type the control 'usb start' to browse for USB storage devices. Hitting whatsoever central to stop autoboot: 0 reading vmlinux.64 6768600 bytes read in 1713 ms (iii.8 MiB/due south) reading vmlinux.64.md5 33 bytes read in 303 ms (0 Bytes/s) Allocating memory for ELF segment: addr: 0xffffffff80800000 (adjusted to: 0x8000 00), size 0x7b93c0 ## Loading large-endian Linux kernel with entry signal: 0xffffffff80ccca80 ... Bootloader: Done loading app on coremask: 0xf Starting cores: 0xf Linux version four.9.79-UBNT (ubnt@0d0770498b9b) (gcc version 4.7.0 (Cavium Inc. Ve rsion: SDK_BUILD build 54) ) #1 SMP Wed Oct 28 xvi:51:13 UTC 2020 CVMSEG size: 3 cache lines (384 bytes) Cavium Inc. SDK-5.one.0 bootconsole [early0] enabled CPU0 revision is: 000d9602 (Cavium Octeon III) FPU revision is: 00739600 Checking for the multiply/shift problems... no. Checking for the daddiu problems... no. Determined physical RAM map: retentivity: 000000002ec00000 @ 0000000020300000 (usable) retention: 000000000ec00000 @ 0000000001100000 (usable) memory: 0000000000400000 @ 0000000000400000 (usable) retention: 0000000000632000 @ 0000000000800000 (kernel data and code) memory: 000000000013a000 @ 0000000000e80000 (kernel data and lawmaking) memory: 000000000004e000 @ 0000000000e32000 (usable after init) Using passed Device Tree <800000000fdb0e00>. Using passed Device Tree. UBNT board DTS pruning ... board 20300 major one software IO TLB [mem 0x01f1d000-0x01f5d000] (0MB) mapped at [8000000001f1d000-eighty 00000001f5cfff] Primary instruction cache 78kB, virtually tagged, 39 way, xvi sets, linesize 128 bytes. Primary data cache 32kB, 32-way, 8 sets, linesize 128 bytes. Secondary unified cache 512kB, 4-way, 1024 sets, linesize 128 bytes. Secondary unified enshroud 512kB, four-manner, 1024 sets, linesize 128 bytes. Zone ranges: DMA32 [mem 0x0000000000400000-0x00000000efffffff] Normal empty Movable zone start for each node Early retentivity node ranges node 0: [mem 0x0000000000400000-0x0000000000fb9fff] node 0: [mem 0x0000000001100000-0x000000000fcfffff] node 0: [mem 0x0000000020300000-0x000000004eefffff] Initmem setup node 0 [mem 0x0000000000400000-0x000000004eefffff] percpu: Embedded 17 pages/cpu @8000000001f6a000 s29056 r8192 d32384 u69632 Built 1 zonelists in Node club, mobility grouping on. Total pages: 251420 Policy zone: DMA32 Kernel command line: root=/dev/mmcblk0p2 rootdelay=10 rw rootsqimg=squashfs.img rootsqwdir=w mtdparts=spi32766.0:2048k(boot0),2048k(boot1),64k(eeprom) panel= ttyS0,115200 rootwait rootflags=information=journal PID hash table entries: 4096 (order: 3, 32768 bytes) Memory: 996700k/996700k bachelor (4946k kernel code, 0k reserved, 1397k data, iii 12k init) SLUB: HWalign=128, Order=0-three, MinObjects=0, CPUs=4, Nodes=2 Hierarchical RCU implementation. Build-time aligning of foliage fanout to 64. NR_IRQS:767 nr_irqs:767 nine CIB interrupt controller probed: 800107000000e000 23 $.25 CIB interrupt controller probed: 800107000000e200 12 $.25 CIB interrupt controller probed: 800107000000e400 6 bits CIB interrupt controller probed: 800107000000ec00 xv bits CIB interrupt controller probed: 800107000000e600 iv bits CIB interrupt controller probed: 800107000000e800 11 $.25 CIB interrupt controller probed: 800107000000e900 11 bits clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb , max_idle_ns: 881590591483 ns Calibrating delay loop (skipped) preset value.. 2000.00 BogoMIPS (lpj=10000000) pid_max: default: 32768 minimum: 301 Security Framework initialized Dentry cache hash tabular array entries: 131072 (guild: eight, 1048576 bytes) Inode-cache hash tabular array entries: 65536 (order: 7, 524288 bytes) Mount-enshroud hash table entries: 2048 (social club: 2, 16384 bytes) Mountpoint-cache hash tabular array entries: 2048 (guild: two, 16384 bytes) Checking for the daddi bug... no. SMP: Booting CPU01 (CoreId 1)... CPU1 revision is: 000d9602 (Cavium Octeon III) FPU revision is: 00739600 Cpu one online SMP: Booting CPU02 (CoreId 2)... CPU2 revision is: 000d9602 (Cavium Octeon III) FPU revision is: 00739600 Cpu 2 online SMP: Booting CPU03 (CoreId 3)... CPU3 revision is: 000d9602 (Cavium Octeon III) FPU revision is: 00739600 Cpu 3 online Brought up four CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911 2604462750000 ns futex hash table entries: 1024 (guild: v, 131072 bytes) Net: Registered protocol family 16 HugeTLB registered 2 MB folio size, pre-allocated 0 pages SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@fifty inux.it> PTP clock back up registered clocksource: Switched to clocksource OCTEON_CVMCOUNT Cyberspace: Registered protocol family two TCP established hash tabular array entries: 8192 (guild: four, 65536 bytes) TCP bind hash tabular array entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: ii, 16384 bytes) UDP-Lite hash tabular array entries: 512 (order: two, 16384 bytes) Cyberspace: Registered protocol family unit 1 octeon_pci_console: Initialized. /proc/octeon_perf: Octeon performance counter interface loaded platform 1180068000000.uctl: clocks initialized. platform 1180069000000.uctl: clocks initialized. workingset: timestamp_bits=61 max_order=18 bucket_order=0 squashfs: version four.0 (2009/01/31) Phillip Lougher io scheduler noop registered io scheduler cfq registered (default) octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO: base of operations = 0 Serial: 8250/16550 driver, six ports, IRQ sharing disabled console [ttyS0] disabled 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 34, base_baud = 25000 000) is a OCTEON console [ttyS0] enabled console [ttyS0] enabled bootconsole [early0] disabled bootconsole [early0] disabled 1180000000c00.series: ttyS1 at MMIO 0x1180000000c00 (irq = 35, base_baud = 25000 000) is a OCTEON random: fast init washed loop: module loaded m25p80 spi32766.0: mx25l6405d (8192 Kbytes) 3 cmdlinepart partitions plant on MTD device spi32766.0 Creating 3 MTD partitions on "spi32766.0": 0x000000000000-0x000000200000 : "boot0" 0x000000200000-0x000000400000 : "boot1" 0x000000400000-0x000000410000 : "eeprom" spi-octeon 1070000001000.spi: OCTEON SPI bus driver libphy: mdio_octeon: probed mdio_octeon 1180000001800.mdio: Probed libphy: mdio_octeon: probed mdio_octeon 1180000001900.mdio: Probed libphy: Stock-still MDIO Bus: probed octeon-ethernet 2.0 Node 0 Interface 0 has 4 ports (QSGMII) Node 0 Interface i has four ports (QSGMII) Node 0 Interface 2 has 4 ports (NPI) Node 0 Interface three has 4 ports (LOOP) Node 0 Interface iv has one ports (AGL) dwc3 1680000000000.xhci: Configuration mismatch. dr_mode forced to host dwc3 1690000000000.xhci: Configuration mismatch. dr_mode forced to host ehci_hcd: USB two.0 'Enhanced' Host Controller (EHCI) Commuter ehci-platform: EHCI generic platform commuter ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-platform: OHCI generic platform driver xhci-hcd xhci-hcd.0.machine: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB charabanc registered, assigned omnibus number ane xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f06d hci version 0x100 quirks 0x02010 010 xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0x1680000000000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Production=two, SerialNumber=i usb usb1: Production: xHCI Host Controller usb usb1: Manufacturer: Linux four.9.79-UBNT xhci-hcd usb usb1: SerialNumber: xhci-hcd.0.car hub 1-0:1.0: USB hub constitute hub 1-0:ane.0: one port detected xhci-hcd xhci-hcd.0.car: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned passenger vehicle number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. usb usb2: New USB device institute, idVendor=1d6b, idProduct=0003 usb usb2: New USB device strings: Mfr=3, Product=two, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 4.nine.79-UBNT xhci-hcd usb usb2: SerialNumber: xhci-hcd.0.motorcar hub 2-0:one.0: USB hub found hub ii-0:1.0: 1 port detected xhci-hcd xhci-hcd.1.auto: xHCI Host Controller xhci-hcd xhci-hcd.i.auto: new USB double-decker registered, assigned bus number 3 xhci-hcd xhci-hcd.1.machine: hcc params 0x0220f06d hci version 0x100 quirks 0x02010 010 xhci-hcd xhci-hcd.1.motorcar: irq 26, io mem 0x1690000000000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=two, SerialNumber=i usb usb3: Production: xHCI Host Controller usb usb3: Manufacturer: Linux 4.9.79-UBNT xhci-hcd usb usb3: SerialNumber: xhci-hcd.one.car hub 3-0:ane.0: USB hub plant hub 3-0:ane.0: 1 port detected xhci-hcd xhci-hcd.1.auto: xHCI Host Controller xhci-hcd xhci-hcd.ane.auto: new USB bus registered, assigned bus number iv usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. usb usb4: New USB device institute, idVendor=1d6b, idProduct=0003 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=ane usb usb4: Product: xHCI Host Controller usb usb4: Manufacturer: Linux four.ix.79-UBNT xhci-hcd usb usb4: SerialNumber: xhci-hcd.1.machine hub 4-0:i.0: USB hub found hub iv-0:i.0: 1 port detected usbcore: registered new interface driver usb-storage i2c-octeon 1180000001000.i2c: probed i2c-octeon 1180000001200.i2c: probed octeon_wdt: Initial granularity five Sec sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Net: Registered protocol family unit 17 Internet: Registered protocol family 15 OF: fdt:not creating '/sys/firmware/fdt': CRC cheque failed Waiting ten sec before mounting root device... mmc0: new DDR MMC carte du jour at address 0001 mmcblk0: mmc0:0001 MMC4GB 3.64 GiB mmcblk0boot0: mmc0:0001 MMC4GB partition 1 2.00 MiB mmcblk0boot1: mmc0:0001 MMC4GB partition 2 2.00 MiB mmcblk0rpmb: mmc0:0001 MMC4GB partition iii 512 KiB mmcblk0: p1 p2 EXT4-fs: Warning: mounting with information=journal disables delayed allocation and O_D IRECT support! EXT4-fs (mmcblk0p2): mounting ext3 file organization using the ext4 subsystem EXT4-fs (mmcblk0p2): mounted filesystem with journalled data mode. Opts: data=jo urnal VFS: Mounted root (overlay filesystem) on device 0:13. devtmpfs: mounted Freeing unused kernel memory: 312K This architecture does not have kernel retentivity protection. systemd[1]: System time before build time, advancing clock. Cyberspace: Registered protocol family unit 10 ip_tables: (C) 2000-2006 Netfilter Core Team systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPA RMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOM P +BLKID +ELFUTILS +KMOD +IDN) systemd[one]: Detected architecture mips64. Welcome to Debian GNU/Linux nine (stretch)! systemd[1]: Fix hostname to <ubnt>. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. systemd[i]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. systemd[ane]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Piece. systemd[one]: Created slice Organization Slice. [ OK ] Created piece System Slice. [ OK ] Created slice arrangement-getty.piece. [ OK ] Created slice arrangement-serial\x2dgetty.slice. Mounting POSIX Bulletin Queue File System... [ OK ] Started Frontwards Countersign Requests to Wall Directory Scout. [ OK ] Listening on Periodical Socket. Starting Create list of required st…ce nodes for the current kernel... Starting Journal Service... Starting Load Kernel Modules... [ OK ] Reached target Slices. [ OK ] Reached target Swap. Starting Remount Root and Kernel File Systems... [ OK ] Started Acceleration Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Encrypted Volumes. [ OK ] Listening on udev Control Socket. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Journal Service. [ OK ] Started Create list of required sta…vice nodes for the electric current kernel. [ OK ] Started Remount Root and Kernel File Systems. ubnt_platform: loading out-of-tree module taints kernel. ubnt_platform: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting Create Static Device Nodes in /dev... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Load Kernel Modules. [ OK ] Started udev Coldplug all Devices. Starting Apply Kernel Variables... Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /run/shm... Mounting /var/log... Mounting /tmp... Mounting /lib/init/rw... [ OK ] Mounted /lib/init/rw. [ OK ] Mounted /var/log. [ OK ] Mounted /run/shm. [ OK ] Mounted /tmp. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Utilize Kernel Variables. [ OK ] Found device /dev/ttyS0. Starting Flush Journal to Persistent Storage... [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about Organisation Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target Organization Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on UUID daemon activation socket. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and make clean activities. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Bones System. [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Coach Organisation Message Bus. Starting Login Service... Starting System Logging Service... Starting Create vyatta file system.... [ OK ] Started Deferred execution scheduler. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Started Login Service. [ OK ] Started Organisation Logging Service. [ OK ] Started Create vyatta file arrangement.. Starting Load the configuration of features which need reboot... [ OK ] Started Load the configuration of features which demand reboot. [ OK ] Reached target Network (Pre). Starting Vyatta PPPoE... Starting Raise network interfaces... [ OK ] Started Vyatta PPPoE. Starting UBNT daemon... [ OK ] Started Enhance network interfaces. [ OK ] Started UBNT daemon. Starting EdgeOS IMI manager... [ OK ] Started EdgeOS IMI manager. Starting EdgeOS NSM daemon... [ OK ] Started EdgeOS NSM daemon. Starting EdgeOS RIB daemon... [ OK ] Started EdgeOS RIB daemon. Starting UBNT Routing Daemons... [ OK ] Reached target Network. Starting /etc/rc.local Compatibility... Starting Allow User Sessions... [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started Allow User Sessions. Stopping System Logging Service... [ OK ] Stopped Organisation Logging Service. Starting System Logging Service... [ OK ] Started Organization Logging Service. Stopping System Logging Service... [ OK ] Stopped System Logging Service. Starting System Logging Service... [ OK ] Started System Logging Service. Starting Network Time Service... [ OK ] Started Network Time Service. Stopping Network Time Service... [ OK ] Stopped Network Time Service. Starting Network Time Service... [ OK ] Started Network Time Service. Starting GUI Telnet Daemon... [ OK ] Started GUI Telnet Daemon. Starting Lighttpd Daemon... [ OK ] Started Lighttpd Daemon. [ OK ] Started UBNT Routing Daemons. Starting Netplug Services... [ OK ] Started Series Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started OpenBSD Secure Shell server. Starting Outset ubnt feature daemons... [ OK ] Started Netplug Services. [ OK ] Started Outset ubnt feature daemons. [ OK ] Reached target Multi-User System. Starting Update UTMP almost System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes.

Re-create HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING

Space for additional notes, links to forum threads or other resources.

millenderdisid1937.blogspot.com

Source: https://openwrt.org/toh/ubiquiti/edgerouter_4

Share this post